Product Description
1. Scope of Application
This specification is only applicable to indoor Mini COB products of the 320*160 module series.
2. Product Features
-
Fully flip-chip LED, no ghosting, no “caterpillar effect”, low power consumption;
-
Matte surface, non-reflective, high contrast;
-
COB packaging with dustproof and moisture-proof design, surface hardness of 4H, and washable;
-
Selected PWM driver IC, smooth grayscale transition, high refresh rate, realistic image display, and vivid colors;
-
Industry-standard 320*160 module size and mounting holes;
-
Low-voltage drive design, low-power cool screen.
3. Module Dimensions
4. Module Appearance
Mini COB LED Display Specifications (320×160 Series)
| Specification | P1.25 | P1.53 | P1.86 |
|---|---|---|---|
| Pixel Pitch (mm) | 1.25 | 1.53 | 1.86 |
| LED Type | Fully Flip-Chip | ||
| Module Resolution | 256×128 | 208×104 | 172×86 |
| Module Size (mm) | 320×160 | ||
| Module Weight (kg) | Approx. 0.5 | ||
| Scan Mode | 64 Scan | 52 Scan | 43 Scan |
| Supply Voltage | ≥ DC 4.5V (Recommended) | ||
| Flash Calibration Storage | Supported | ||
| Pixel Density (dots/m²) | 640,000 | 422,753 | 288,906 |
| Optoelectronic Parameters | |||
| Brightness Calibration | Supported | ||
| Color Calibration | Supported | ||
| White Balance Brightness (nit) | 600 (after calibration) | ||
| Color Temperature (K) | 9300 | ||
| Viewing Angle (H/V) | 160° | ||
| Brightness Uniformity | ≥ 95% | ||
| Chromaticity Uniformity | ±0.003 Cx, Cy | ||
| Contrast Ratio | ≥ 10,000:1 | ||
| Current per Module | Approx. 4.0A | Approx. 2.4A | Approx. 2.4A |
| Power per Module (DC 4.5V) | Approx. 19W | Approx. 11W | Approx. 11W |
| Processing Performance | |||
| Frame Rate (Hz) | 60 | ||
| Refresh Rate (Hz) | 3840 | ||
| Driving Method | Constant Current | ||
| Grayscale (bit) | 13 | ||
| Usage Parameters | |||
| Typical Lifespan (hrs) | ≥ 100,000 | ||
Module Signal Interface Definition (IC Perspective)
| Pin | Signal | Function | Pin | Signal | Function |
|---|---|---|---|---|---|
| 1 | R1 | Red Data Signal | 2 | G1 | Green Data Signal |
| 3 | B1 | Blue Data Signal | 4 | CS | Chip Select |
| 5 | R2 | Red Data Signal | 6 | G2 | Green Data Signal |
| 7 | B2 | Blue Data Signal | 8 | CK | Clock |
| 9 | R3 | Red Data Signal | 10 | G3 | Green Data Signal |
| 11 | B3 | Blue Data Signal | 12 | MO | Data Output |
| 13 | R4 | Red Data Signal | 14 | G4 | Green Data Signal |
| 15 | B4 | Blue Data Signal | 16 | MI | Data Input |
| 17 | A | Row Control Signal | 18 | B | Row Control Signal |
| 19 | C | Row Control Signal | 20 | NC | Not Connected |
| 21 | NC | Not Connected | 22 | GND | Ground |
| 23 | CLK | Clock Signal | 24 | LAT | Latch Signal |
| 25 | OE | Enable Signal | 26 | GND | Ground |
IV. Packaging Information
- ① One piece of EPE foam holds 20 modules
- ② One carton contains 2 pieces of EPE foam, totaling 40 modules
- ③ Carton dimensions: 537mm × 382.6mm × 397mm
V. Usage Precautions
-
Prevent Electrostatic Discharge (ESD) when handling LED panels:
- Wear grounded anti-static wrist straps or anti-static gloves.
- Ensure proper grounding of the screen; ground resistance must be ≤ 10 ohms. Conduct inspections every 6 months.
-
Cleaning the LED panel surface:
Do not use unknown chemical liquids. Clean gently using a clean, lint-free cloth or a soft cloth dampened with purified water. -
Electrical safety:
The power distribution box must be equipped with surge protectors and other protective devices.
